Ablocco

From WOI Encyclopedia Italia
Revision as of 21:56, 16 August 2008 by WikiSysop (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Ablocco

  • via Due Palazzi 39
  • 35100 Padova - Italy
  • +39 (049) 617810 tel
  • +39 (049) 617810 fax
  • [email protected]


Ablocco makes high quality, made to measure triathlon/track/road frames in Padova. While Albocco primarily uses steele (18MCDV6) in the construction of their frames, they have also begun to use a cold drawn, zinc, magnesium aluminium (7003-T6). Ablocco bikes are fairly light, achieved through what they refer to as "an improved butt geometry (A.B.T. Advanced Butt Technology)," allowing for a reduction in the thickness of the tubes, and subsequently, a reduction in weight in the lower stress area. Ablocco has also made ergonomic advancements through their patented Measurement System which is based on the study of compression and the extension angles of lower and upper limbs under stress. Allowing for a final product that does not over stress the knees, hips and back.


Bike Information and Photos by Marque
3T  · Ablocco  · Basso  · Battaglin  · Bellesi  · Bianchi  · Bicidautore  · Bottecchia  · Campagnolo  · Carnielli  · Carrera Podium  · Casati  · Cicli Moser  · Cinelli  · Ciocc  · Colnago  · Columbus  · Daccordi  · DeRosa  · Di Blasi  · Guerciotti  · Legnano  · Leri  · Masciaghi  · Mondonico  · Olmo  · Pinarello  · Rossin  · Scapin Bike  · Somec  · Tommasini  · Torelli  · Viner  · Wilier